Accuracy and limits

SonoDose is an interim check. Here is plainly what that means.

What it is

A way for in-house health and safety staff to find out where noise is likely to matter, and to prioritise a full assessment.

What it is not

  • It is not a noise risk assessment under the Control of Noise at Work Regulations 2005 or an equivalent regulation.
  • It is not a personal dosimeter, and not a replacement for a Class 1 or Class 2 sound level meter used by a competent person.
  • It does not certify compliance.

Phone microphone or external microphone

A phone microphone alone is a screening tool. Accuracy depends on the phone, the case, wind and distance, and the level it was calibrated at. An external microphone designed for measurement, calibrated with an acoustic calibrator before and after use, usually gives better results. SonoDose records which you used.

Calibration

Calibrate before and after every survey. SonoDose stores the calibration level and date and flags results that are uncalibrated or where the calibration drifted.

Full-shift and task-based results

Daily exposure is calculated from the levels and times you log. If coverage of the shift is low, the report says so. Results are indicative only.

When to call a competent person

If results are near or above an action value, if people use hearing protection, or if you are unsure, commission a full assessment.